The grain that came out just made my heart so excited. "This one is on hold but I thought I would share photos of her anyway. *Is it safe to buff Arm-R-Seal with an auto polish? Add Bloxygen can. When you paint (perfect) lines on furniture, it really doubles the time of your work, but the time it takes can be well worth it. Gel Oil Based Urethane Top Coat & Wipe-on Oil Finishes | General Finishes Our finishes are engineered as a system and are compatible with each other. General Finishes - Arm-R-Seal Varnish - Solvent Based - Semi-Gloss - Quart It is one of our most popular finishesfor butcher-block counters. General Finishes will not be responsible for color satisfaction, misapplication, nor compatibility with other manufacturers' products. Eldredge Lumber & Hardware in Sanford , ME sells General Finishes products! You can tell if an oil-based finish is dry if it is no longer tacky, cool to the touch, and if you can press a cotton ball over the surface and nothing sticks. I love leaving the best parts of the original woodwork so i left old intarsia around the edges and i refreshed the top of the piece by applying general finishesmaple woodstain. Stir the wood finish thoroughly and often throughout use to reincorporate solids that have settled to the bottom of the can. This natural look is fantastic! Rub down the finish with 0000 steel wool and, COMPARE Paints, Glazes & Pigmented Topcoats, COMPARE Primers, Sanding Sealers & Undercoats, Water Based Finishes & Coatings For Professional, Industrial & OEM Use, Water Based Pigmented Top Coats, Paints, Glazes & Enamel, Water Based Sanding Sealers, Wood Primers, and Undercoats, Professional Water Based Wood Stains & Dye Stains, Enduro Ready to Match (RTM) Water Based Stain, Exterior Water-Based Wood Stains, Top Coats & Deck Oil, Water Based Extenders, Accelerators & Brush and Gun Cleaner, Fill Sticks -NEW Assortment Pack of 15 Color Groups, Touch Up Markers - NEW Assortment Pack of 15 Color Groups, Water Based Paints and Glazes for Cabinets, Millwork and Furniture, Water Based Stain Blocking Primers, Undercoats, & Sanding Sealers, High Performance Water Based Polyurethane Topcoat, Water Based Wood Stains, Dye Stain and Pre-Conditioners, Oil Based Wipe-on Stains, Pre-stain Conditioners & Sealers, Oil Based Urethane Gel & Liquid Wipe-on Top Coats, Fill Stick and Touch Up Marker Assortment Pack, Step 2: How To Apply General Finishes Gel Topcoat, How to Apply Gel Stain and Gel Topcoat to Raw Wood, 4 Reasons to Switch to Water-Based Wood Finishes, GF as Seen In Green Building & Design Magazine, 12-24+ hr raw wood, 72+ hr existing finish until non-tacky. Allow oil to dry overnight before applying GF product. Large surfaces such as cabinets or tables and complex projects with lots of detail are easier to cover with a liquid topcoat rather than a GEL SATINtopcoat. General Finishes will be responsible only for the cost of our products, and not for costs such as labor, damage or project replacement. A great before and after from Dragonfly & Lily Pads! General Finishes Oil Based Gel Topcoat, 1 Quart, Satin Visit the General Finishes Store 1,487 ratings Price: $49.95 ($1.56 / Fl Oz) Size: 1 Quart 1 Gallon 1 Half-Pint 1 Pint 1 Quart Oil based penetrating finish Darkens/ambers with time Dry Time: 12-24 hours Cure Time: 30 days Oil soaps and wax can also cause adhesion failures. Be sure to test your topcoat in a hidden area first. Avoid heavy pressure & back-brushing. Day 2: Level sand with 320-grit sandpaper. General Finishes Arm-R-Seal Oil Based Topcoat is an extremely durable varnish suitable for furniture, cabinets, millwork and case goods. . Remove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag. The life of the product may be extended with proper care and storage. This item: General Finishes Arm-R-Seal Oil Based Topcoat, 1 Pint, Satin $39.99 Bates- Foam Paint Brushes, 16 Pack, 2 Inch, Sponge Brushes, Sponge Paint Brush, Foam Brushes, Foam Brushes for Painting, Foam Brushes for Staining, Paint Sponges, Foam Sponge Brush $6.95 ($0.43/Count) General Finishes Oil Base Gel Stain, 1/2 Pint, Antique Walnut My aim when working on a piece of furniture is never to make it look ' "This antique 1940's era solid wood Duncan Phyfe style dresser has been hand painted in a beautiful aqua color for a bright, fun new look. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster. - Upcycling by Amy. Decant remaining product from the can before stirring. America's leading manufacturer of innovative water-based finishes. Simply wipe on, allow 5 minutes to penetrate and wipe off the excess. My client had it 'restored' and the water and heat damage was still visible. I applied 3 coats of the Java to achieve this rich colour. Work in a well-ventilated area. She's another beauty! Loosen tight clothing. General Finishes Orange Oil Furniture Polish, How to Mix General Finishes Conversion Varnish, Enduro Conversion Varnish Product Overview, Comparison of General Finishes Water-Based Top Coats, Exterior 450 Water-Based Topcoat Product Overview, Enduro Clear Poly Water Based Topcoat Product Overview, 4 Reasons to Switch to Water-Based Wood Finishes, GF as Seen In Green Building & Design Magazine, Satin (25-35), Semi-Gloss (50-60), Gloss (80+), 12-24+ hr raw wood, 72+ hr existing finish until non-tacky. Because Bloxygen gas is heavier than air, it sinks to the surface of the leftover finish, creating a barrier between product and air trapped in the container. Even though General Finishes products are water resistant, they are not impervious to standing water condensation (like an epoxy finish). Charming, charming and more charming! These solid walnut Gunlocke chairs have been stripped of their old, thick, failing finish and stained in General Finishes Candlelight to match a dining table we did a couple of years ago. Although Arm-R-Seal rarely needs thinning because of its low viscosity, it can be thinned with up to 10% mineral spirits - more than that may thin the solids content too much. Pound the lid in placeusing a rubber mallet to avoid distorting the chime or lid. Every minute the can is open, the product is curing. Ash coffee table stained with General Finishesoil based Honey Maple stain and finished with their high performance water based topcoat. Follow this by cleaning with 0000 Medium steel wool and mineral spirits. The top is a base of Linen Milk Paint with a wash of Antique White and then glazed in Van Dyke Brown and sealed in High Performance top coat flat." Sealed with GF Gel Top Coat." The liquid creates a seal around the lid when stored upside down, preventing air from getting in. General Finishes Arm-R-Seal Oil Based Topcoat, 1 Gallon, Gloss Wipe down with water mixed with 5% Denatured Alcohol. The top and aprons are natural cherry. If you want to change the sheen, you can re-coat with a different sheen over top. The life of the product may be extended with proper care and storage. Remove fingerprints, cooking fumes and smoking residue with mild soap and water. The woods used are Purple Heart, Cherry, Olivewood, Mahogany, Padauk and Walnut. Decant remaining product from the can before stirring. You have just finished applying a fine furniture finish. - A Life Refurbished. Stunning transformation from Studio Paint_ of Fonthill, Ontario! Product in the chime canbe minimized by using a pouring lid, such as Fitsall. - Amy of High Style Restyle - Painted Paradise - Antiques, Vintage, and Repurposed Furniture. 3. The second layer of top coat will replace the appearance of the first. - Kristin Forbes *Which General Finishes Products Would Work Best on a Restaurant Table? Meets ASTM requirements. This is a simple segmented bowl that endevors to use the natural colors of the various woods to make an attractive package. All other water-based and High Performance top coats dry clear. See our video: How to Prep Sand Raw Wood. *Why did my remaining Arm-R-seal thicken in the can? If you decide to re-coat before the recommended time, test dryness. Gel Topcoat is available in Satin. 4. Product Details Arm-R-Seal topcoats are made with only the highest quality urethane resin, making them extremely durable and long lasting. 3 coats of topcoat are recommended. Kristin entered this set into the DIY Upcycled Furniture category of the 2016 GF Design Challenge Contest, Heather of the Modern Farmhouse refinished this dresser and entered this piece into the DIY Upcycled Furniture category of the 2016 GF Design Challenge Contest. Viscosity: thick, 1000-2000 cPs. The seat was stained with GF Gray Gel Stain and sealed with GF Gel Topcoat. We can't get over this custom built Midcentury-style coffee table finished with our Danish Teak Liquid Oil-Based Wood Stain by David Velazquez! We sealed the top lid with General Finishes Gel Top Coat." All NEW Liquid Oil Wood Stain color in Mocha. "I must say the transformation of our den has been wonderful with the addition of the hand hewn beam. We used both General Finishes High Performance Topcoat and Gel Topcoat in a satin finish to enhance its durability." I love the way it turned out! She was given a good sanding and cleaning and then stained with GF Salem from top to bottom. Avoid placing heavy objects onsurfaces that have not completely cured. Keep lid closed while working. Insimplest terms, here is the difference between drying and curing: Drying is the evaporation of solvents in oil-based products, and water in water-based products. It took a can of stripper and several sanding pads but I could not be more surprised and pleased with the final results. It is formulated to be wiped on with a cloth or applied with a foam brush, thus . Custom order for myself. I am not a person who works in the renovation field. This deskwas inspired by similar pieces that I've seen in high end furniture stores. Remove contaminated clothing and shoes and clean before reuse. Protect your workspace with a tarp, your hands with gloves, and your clothes with an apron. Arm-R-Seal is oil based and will amber. Additional coats will not improve durability. These contaminants will not harm the finish, but they accumulate on surfaces and dull the original luster. The perfect brown ever! Do not induce vomiting unless directed to do so by medical personnel. Strip, sand and refinish the table. General Finishes Arm-R-Seal Oil Based Topcoat, 1 Pint, Gloss Once I got to work, I discovered that the wood pattern beneath the old finish was so symmetrical it was almost uncanny, and exposing it gave the table a fresh, updated look. Arm-R-Seal is General Finishes' premium oil-based urethane-alkyd topcoat for use on indoor wood projects. Remove dust with a vacuum,tack cloth or clean water dampened rag before re-coating. If in doubt, wait longer.Increase dry time if: Cure Time Before Use Carpet may discolor if cleaned with mineral spirits. Get all the details of this project at http://www.dragonflyandlilypads.com/2015/09/my-swheat-table-flip.html, "Wanted to share a table I just did for a customer. Pry open sealed lids with a paint can opener by hooking under the lid's rolled edge. Unfortunately, even though you sanded the table down to raw wood, sanding alone will not remove this type of contamination. Clean up water, alcohol and food spills in a timely manner and use placemats & coasters toprotect the finish. INHALATION Move to fresh air. General Finishes recommends applying this water-based polyurethane at a temperature no greater than 70 degrees Fahrenheit and 50 percent humidity. The base was painted in General Finishes Lamp Black Milk Paint with very "I never get tired of seeing the power of paintand stain. Avoid wiping used brushes on the lid. Take great care when disposing of product-soaked applicators. I really like the way it turned out!! Keep container tightly closed when not in use. As a topcoat I used GF's Oil Based Gel Urethane Topcoat "Duncan Phyfe Style Dresser by Dixie painted in General Finishes Patina Green Milk Paint and shadowed with General Finishes Lamp Black Milk Paint. Do not store in unlabeled containers. If you correct a run promptly, you will not see a mark. Test for adherence and aesthetics before beginning.FIRST AID: Seek immediate medical attention if symptoms occur due to the following. Tuesday February 28, 2023 10 am - 3 pm Austin Hardwoods Get More Information AllPro 2023 Spring Meeting in Phoenix, AZ Originally a low dresser from the 1960s, this piece is now versatile enough to fit in almost every room in your house. I wanted to show that your home can be stylish and on trendfor a fraction of the price by upcycl ing great pieces of furniture!" Brush on the polyurethane so the brush strokes are parallel to the grain of the wood. Even though I filled the holes before Can't get enough of this stunning refinished table by Studio Paint_ of Fonthill Ontario! Treat gently, and do not clean with commercial products during the cure period. Lamp Black Milk Paint for the body, High Performance Topcoat in flat for sealing, Antique Walnut & Nutmeg Gel Stains for the top, followed by 3 coats of the Gel Urethane. Gel Topcoat: Oil Based Urethane | General Finishes Decant what you will use into a bowl, paper cup, or plate, and close can lid as you work. - Blue & White Living Home Decor, "Your products are superior. Do not apply over light or white finishes as this is an oil-based finish, which is amber in color upon application and will deepen over time. Take great care when disposing of product-soaked applicators. I use it almost exclusively." Application materials, such as brushes and towels, containing oil-based productsmay spontaneously catch fire if improperly discarded. General Finishes will be responsible only for the cost of our products, and not for costs such as labor, damage or project replacement.Contamination and Compatibility The top has been stained with General Finishes Antique Walnut Gel Stain and finished with GF gel "Antique desk Refinished in black, with light distressing and a dark stained top! New Stained Surface: Do not sand.
Karratha Tides Fishing,
Pros And Cons Of Living In Wellington Fl,
Tim Tracker Racist,
Articles G